5 decades, a story that changed history.


An ingenious observation!

In 1965 Giuseppe Manini,then a building contractor, noticed that the gates were always left open in residential communities. You needed to get out of the car to open them, but no one ever went back to close them afterwards.

The solution? He’s got it.

As had the great inventorsbefore him, Manini crafted little masterpieces in the field of hydraulic technology. The end result was the beginning of the FAAC product family: 750 built-in operators, the first underground swing gate operator.
The 750 is followed by the 400, the first on-swing-gate model, then many more. The great demand soon led to the need for a sales network for their distribution.


The idea’s a real hit!

These were the years of the first great "gamble", when our company’s original small-scale production system was transformed into an industrial mass production system capable of maintaining high quality standards.

The 402 was the first product created by the new series production system. Die-cast aluminium molds were introduced, new materials like POM for valves were developed, and Gerotor pumps, quieter and more efficient than gear pumps, were adopted: these and other components all helped improve performance and product innovation.

Expansion and consolidation.

The first subsidiaries opened. Connected directly to the central plant, they ensured distribution of products abroad.

The first training courses began in parallel. These were essential for building and above all "educating" the first specialized sales force.

Success extended outside Italy and led to the opening of two affiliates. At the same time, in Zola Predosa, what in future years was to become the headquarters of an increasingly forward-looking group was opened.


The start of the electronic era

The development of electronics and the implementation of technologies previously only found in the field of personal computers heralded a new era for FAAC products. The introduction of microprocessor electronic control cards permitted the development of installations with far more functionalities than simple opening and closing.

Production crosses the Channel

FAAC’s quest for quality in all areas led to the start of electronic component production in Ireland, where the world’s best components were produced, serving the needs of some of the largest international players in the electronics market. This same period saw the arrival of BLUE LINE, the first ever range of accessories with a standard design.

New solutions, more and more patents.

The introduction of electromechanical products extended the user base by offering cheaper technology without compromising on quality. At the same time, FAAC continued to protect its ideas with a long list of patents, including a doubly futuristic transmitter with Self Learning technology (today’s SLH).

This invention made it possible to equip systems with transmitters to eliminate the need to introduce rolling codes on site. The automatic generation of these codes by algorithm made it far harder to duplicate the transmitter, significantly improving system security.


Great technology, small size

With the arrival of SMT (Surface Mount Technology), electronic control cards, as well the products that used them, became a lot smaller. Miniaturized transmitters paved the way for the pocket size remote controls we are so familiar with today.

Major investments in design led to the development of increasingly complex and intelligent control cards, as well as the technology needed to manufacture them. The BUS 2easy two-wire system for dialogue between control cards and accessories was introduced, dramatically simplifying the installation of systems and peripherals.

Welcome to the 3D age


Innovation and safety.

The implementation of 24 V technology not only improved motor control but also allowed systems to conform to the latest safety standards without the need for additional safety devices.

Beyond quality

Fitting hydraulic actuators with 24 V control technology led to the development of the new HYBRID range, combining performance and safety in the one product. When energy efficiency was not yet a major issue, FAAC’s patented CYCLO system increased the efficiency and reduced the consumption of gearmotors, achieving the highest power/consumption ratio. This resulted in a concept destined to guide development in the near future: SAFE & GREEN, later applied also to 230 V systems.

Custom solutions

Though extremely efficient, mass production was no longer able to satisfy the growing demand for customized products. FAAC therefore adopted the TOYOTA SYSTEM. Production lines were organised according to the ONE PIECE FLOW principle. Each product was assembled in a single cycle to the benefit of better flexibility, higher quality and greater production capacity.

Smart logistics

Logistics were reviewed in a similar way: the small warehouses dotted around the country were replaced by larger units capable of stocking more products and processing requests more quickly.



Innovation, expertise and the courage to pioneer new roads: these values have characterised the entire history of the FAAC Group. Every step has been typified by a forward-looking approach and a pioneering spirit – essential attributes for a company committed to building a solid future.

  • image_description
  • image_description
  • image_description
  • image_description
  • image_description
  • image_description
  • image_description
  • image_description
  • image_description
  • image_description

50 years of success

50 years after its formation, FAAC wishes to pay homage to these values by celebrating the life of Giuseppe Manini, the first to seek out new horizons and the first to adopt the approach that now characterises our company, our employees and our partners.


  • FAAC Switzerland
  • FAAC France
  • FAAC U.K
  • FAAC U.S.A.
  • FAAC Electronics Ltd. (FEL)
  • FAAC Spain
  • Genius
  • Spazio Italia
  • FAAC Poland

    FAAC Scandinavia

    FAAC Benelux

  • Altron
  • DAAB

    FAAC Australia

    FAAC Dubai

    FAAC Turkey

    FAAC Russia

  • Clemsa
  • Kemko
  • DSS Automatic Doors
    • National Automation Ltd.
  • Industrias Rossi Eletromecanica SA

  • CENTURION Systems Pty Ltd


  • Access control range
  • The 930 was the forerunner of our current range of AUTOMATIC DOORS.
  • Roller shutter motor range
  • The FAAC City range was launched (precursors of our current J range of bollards)
  • Tubular motors